Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Help with SSL VPN UTM 9.1

Hey all, i have a quick question. I have everything set up on the UTM i believe except for the DDNS portion. I have my DDNS set up with no-ip, i just wasnt sure where i needed to put that info at on the UTM for the lookup? every time i try and VPN in it tells me it gets stuck at resolving host's, so im assuming that is the reason. any help would be awesome. Thanks.[:)]


This thread was automatically locked due to age.
Parents
  • Hello,

    1. Make sure your hostname is set correctly. Navigate to Management --> System Settings --> Hostname and make sure the hostname there is your NoIP hostname. If it is not, change it and reboot the machine. You will also need to reinstall the VPN Client on your machine.
    2. Navigate to Network Services --> DNS --> DynDNS. Here you will want to create a new DynDNS using your NoIP information. Make sure to use the first IP on the default route.

    I am not sure if you need to create a new SSL certificate for the VPN server after you change the hostname, if you needed to.
Reply
  • Hello,

    1. Make sure your hostname is set correctly. Navigate to Management --> System Settings --> Hostname and make sure the hostname there is your NoIP hostname. If it is not, change it and reboot the machine. You will also need to reinstall the VPN Client on your machine.
    2. Navigate to Network Services --> DNS --> DynDNS. Here you will want to create a new DynDNS using your NoIP information. Make sure to use the first IP on the default route.

    I am not sure if you need to create a new SSL certificate for the VPN server after you change the hostname, if you needed to.
Children
No Data