Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 1 subscriber
  • Views 2082 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

More problems connecting to a Fritz!Box

lduesing
Had wrong settings in fritz!box - I should read more carefully...

But now I get:

2014:04:12-15:54:12 gw pluto[15778]: | next payload type: ISAKMP_NEXT_VID
2014:04:12-15:54:12 gw pluto[15778]: | emitting 16 raw bytes of V_ID into ISAKMP Vendor ID Payload
2014:04:12-15:54:12 gw pluto[15778]: | V_ID 90 cb 80 91 3e bb 69 6e 08 63 81 b5 ec 42 7b 1f
2014:04:12-15:54:12 gw pluto[15778]: | emitting length of ISAKMP Vendor ID Payload: 20
2014:04:12-15:54:12 gw pluto[15778]: | out_vendorid(): sending [draft-ietf-ipsec-nat-t-ike-00]
2014:04:12-15:54:12 gw pluto[15778]: | ***emit ISAKMP Vendor ID Payload:
2014:04:12-15:54:12 gw pluto[15778]: | next payload type: ISAKMP_NEXT_NONE
2014:04:12-15:54:12 gw pluto[15778]: | emitting 16 raw bytes of V_ID into ISAKMP Vendor ID Payload
2014:04:12-15:54:12 gw pluto[15778]: | V_ID 44 85 15 2d 18 b6 bb cd 0b e8 a8 46 95 79 dd cc
2014:04:12-15:54:12 gw pluto[15778]: | emitting length of ISAKMP Vendor ID Payload: 20
2014:04:12-15:54:12 gw pluto[15778]: | emitting length of ISAKMP Message: 252
2014:04:12-15:54:12 gw pluto[15778]: | inserting event EVENT_RETRANSMIT, timeout in 10 seconds for #1
2014:04:12-15:54:12 gw pluto[15778]: | next event EVENT_RETRANSMIT in 10 seconds for #1

and then it retransmits forever... (first 10sec pause, then 20, and all subsquent ones 40sec)

What information do you need?


This thread was automatically locked due to age.
Parents
  • 0
    Actually, that tells us that the problem is early in the attempt to establish a connection, and it looks like it might be trying to reconnect after having connected earlier.

    First, check #1 in Rulz.  

    If that doesn't reveal anything, please press the [Go Advanced] button below and attach pictures of the IPsec Connection, Remote Gateway, IPsec Policy and of the Phase 1 configuration and IPsec Policy on the Fritz!Box.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    Actually, that tells us that the problem is early in the attempt to establish a connection, and it looks like it might be trying to reconnect after having connected earlier.

    First, check #1 in Rulz.  

    If that doesn't reveal anything, please press the [Go Advanced] button below and attach pictures of the IPsec Connection, Remote Gateway, IPsec Policy and of the Phase 1 configuration and IPsec Policy on the Fritz!Box.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML