Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 13 replies
  • Subscribers 1 subscriber
  • Views 8146 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Access Site to Site VPN from Remote Access

bujar.1986
Hi all,

I hope someone can help me about my problem which maybe is very simple but for me it's really hard to do.

I have two astaros, asg 220 and asg 120. Both are connected via vpn site to site. Networks are as follow:
Asg 220: 192.168.70.0/24
Asg 120: 192.168.90.0/24

 I can access without problem networks when I am in any of the asg's network, but when I connect from my laptop from home via remote access to asg 220, I can't access network in asg 120. Please any help will do great job to me.

Thanks in advance


This thread was automatically locked due to age.
Parents
  • 0
    Again, I'm not sure how much of this should be automated when you set up a Site-to-Site VPN, but I suspect your asg220 is also going to need to know how to route traffic to your asg120 VPN network, so the return packets know how to get back.

    If a route was not automatically created, then you'll probably need to create a static route, type Gateway, network (asg 120 VPN network), gateway (192.168.90.1 or whatever your asg120's IP address is).
Reply
  • 0
    Again, I'm not sure how much of this should be automated when you set up a Site-to-Site VPN, but I suspect your asg220 is also going to need to know how to route traffic to your asg120 VPN network, so the return packets know how to get back.

    If a route was not automatically created, then you'll probably need to create a static route, type Gateway, network (asg 120 VPN network), gateway (192.168.90.1 or whatever your asg120's IP address is).
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?

Unfiltered HTML