Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VPN issues...

Hello everyone.

 I have set up a site to site VPN with a Cisco ASA. Tunnel is up and I can ping the remote network from my ASG, but not from my local network. I think I am missing something stupid but don't know what. Any ideas?

Thanks in advance.

Richard


This thread was automatically locked due to age.
Parents
  • The easy answers are to check that both sides are using the same PSK, confirm that both are using the same setting for NAT-T and that both sides are not behind NATting routers - that both interfaces have a public IP.

    If it wasn't any of those, disable the IPsec Connection, disable debugging if any selections were made, start the IPsec Live Log, enable the IPsec Connection and then show the lines (about 50) from a single connection attempt.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • The easy answers are to check that both sides are using the same PSK, confirm that both are using the same setting for NAT-T and that both sides are not behind NATting routers - that both interfaces have a public IP.

    If it wasn't any of those, disable the IPsec Connection, disable debugging if any selections were made, start the IPsec Live Log, enable the IPsec Connection and then show the lines (about 50) from a single connection attempt.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?