Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to IPSEC VPN with CISCO

i want connect IPVPN with Customer they user cisco.
but i have more information are not clear. 

1.VPN gateway is mean VPN hardware's IP address or IP address for outbound to internet? (My firewall's IP address not same IP address for outbound to internet.)

2.how to create VPN encription domain? i cant use public ip and NAT to private ip/network group? How setting on Astaro?


This thread was automatically locked due to age.
Parents
  • Hi, tawanbd, and welcome to the User BB!

    You might want to consult ASG V7 to Cisco ASA 5505 IPSec VPN: Example.

    1. The Gateway in the Remote Gateway definition is a Host definition with the public IP of the Cisco.

    2. If you must NAT the IPsec traffic to your UTM, then the Cisco needs to know both your public and private IPs for the UTM.  Either that, or the Cisco will need to be set into the equivalent of "Respond Only" for the UTM.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • Hi, tawanbd, and welcome to the User BB!

    You might want to consult ASG V7 to Cisco ASA 5505 IPSec VPN: Example.

    1. The Gateway in the Remote Gateway definition is a Host definition with the public IP of the Cisco.

    2. If you must NAT the IPsec traffic to your UTM, then the Cisco needs to know both your public and private IPs for the UTM.  Either that, or the Cisco will need to be set into the equivalent of "Respond Only" for the UTM.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?