This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IPSEC CLIENT has no Gateway IP

Hallo,

kurz zu meinem Aufbau

1x UTM Zentrale 192.168.1.0
2x UTM Niederlassungen 192.168.2.0 / 192.168.3.0
3x Sophos IPsec Clients 10.242.4.0

Site to Site Ipsec Verbindungen zu den Niederlassungen sind ok.

Jetzt noch eine Default Sophos IPSEC Client Installation mit den Default werten ok.
Verbindungsausbau = OK
jetzt bekommen die IPSEC Clients eine 10.242.2 Adresse aber keinen Client bekommt ein Gateway zugewiesen. Wie überrede ich die Clients das Sie en Gateway zugewiesen bekommen, damit diese dann auch auf die Niederlassungen zugreifen können.
Anbei noch Bilder zu Konfiguration.

This thread was automatically locked due to age.

0 BAlfson over 11 years ago

Hi, delucky, and welcome to the User BB!

There's a KnowledgeBase article about this: How to allow remote access users to reach another site via a Site-to-Site Tunnel

The problem is related to: https://community.sophos.com/products/unified-threat-management/astaroorg/f/68/t/58783

I don't understand why the clients aren't getting a default gateway at present.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel
0 delucky over 11 years ago in reply to BAlfson

the Site to Site Ipsec Tunnel are OK.

Location A Location B Location C

the communication between this Location are ok.

but I will use now a Sophos Software IPsec client with IP 10.242.4.x I am able to reach the first Location A but not Location B or C

if I check all this stuff I find out that there Clients received an IP Address but no Gateway I suspected that the clients have than
IP: 10.242.4.2
Sub: 255.255.255.0
GW: 10.242.4.1

and a route to my Sites 192.168.1.0/24 and 192.168.2.0/24.

Can you let me know if that a normal that the IPSEC Clients received no GW and where I can setup this stuff. The VPN pool are creating by default settings ?
Cancel
Vote Up 0 Vote Down

Cancel

IPSEC CLIENT has no Gateway IP

Submitted a Tech Support Case lately from the Support Portal?