Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 1 subscriber
  • Views 3296 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VPN to 2 networks with same internal IP

juergen852
Hello,

I want to build a VPN connection to 2 of my friends.
Unfortunately, they both use 192.168.1.0 for their internal network and they don't want to change it.

How can I get a connection to both of them?
Can I setup something like a "virtual network" on my side?

E.g.
My internal network: 192.168.50.0
192.168.55.0  Tunnel to Friend A
192.168.60.0  Tunnel to Friend B

So ping to 192.168.55.22 will ping 192.168.1.22 at friend A,
    ping to 192.168.60.124 will ping 192.168.1.124 at friend B.


This thread was automatically locked due to age.
Parents
  • 0
    For each connection, you will want a 1-to-1 Source NAT and a 1-to-1 Destination NAT. Make your best guess at these, and if they don't work, please [Go Advanced] below and attach pictures of the NAT rules for one of the connections.

    Friend A will see your network as 192.168.50.0/24 and his network as 192.168.1.0/24.  You will see Friend A's network as 192.168.55.0/24.

    Depending on what you're sharing, you may need some DNS entries in each location.

    Cheers - Bob
    PS In thinking about this again, once you have this working, you could allow Friend A and Friend B to see each other's network without either of them needing NAT rules.
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    For each connection, you will want a 1-to-1 Source NAT and a 1-to-1 Destination NAT. Make your best guess at these, and if they don't work, please [Go Advanced] below and attach pictures of the NAT rules for one of the connections.

    Friend A will see your network as 192.168.50.0/24 and his network as 192.168.1.0/24.  You will see Friend A's network as 192.168.55.0/24.

    Depending on what you're sharing, you may need some DNS entries in each location.

    Cheers - Bob
    PS In thinking about this again, once you have this working, you could allow Friend A and Friend B to see each other's network without either of them needing NAT rules.
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?

Unfiltered HTML