Hi All,
I think what I want is not so strange but I can't get it working [[:(]]
I have 2 UTM 9's which I can make a SSL or an IPSec Tunnel between them.
Both site can "see" each other and are able to ping hosts between both sites.
What I want is that all (web) traffic is moved from site1 to site2. So all hosts on site1 are having
the public ip of site2.
When I have a host on site1 and use the browser and use the IP (and port 8080) of the UTM on site2,
I get the IP address of UTM2 on site2. But I don't want to manually fill in the proxy (of UTM2) on
all hosts, I want this to be transparent. So all hosts on site1 will use the proxy of UTM2.
When I use Web Protection and use Parent Proxy not all traffic is moved to the proxy of UTM2.
When I go to IPv6 test - IPv6 vs. IPv4 latency test the IPv4 is showing the IP address of the (public) UTM1 and I want
that it shows the (public) IP of UTM2.
For the technical information:
Site1
network: 21.21.21.0/24
UTM1 (LAN): 21.21.21.1
Site2
network: 22.22.22.0/24
UTM (LAN): 22.22.22.1
If I have to make a different setup to accomplish this, please let me know.
So If Site-2-Site Tunnel is IPSec and it's easier to setup with Site-2-Site with SSL, no problem.
If I have to setup another host which will route or NAT the traffic, no problem also...
Additional note: I tried to make a DNA-rule that a hosts HTTP traffic is forwarded to the 2nd UTM on port HTTP or Webproxy (port 8080):
DNAT:
hosts1->HTTP->InternetIPv4->UTM2-> Webproxy
But this is also not working [[:(]]
TIA
This thread was automatically locked due to age.