Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Static Route Issue: SSL Remote Acc VPN

Running ASG 8.202 (ASG220 Appliance). Setup up first SSL Remote Access VPN using Astaro client software. 

Everything worked fine (could ping internal from remote and DNS resolved) with the following configuration:
Internal Interface Network is 10.241.0.0/23
SSL VPN IP Pool is 10.242.2.0/24
Interface Route set in Interfaces & Routing>Static Routing = SSL VPN -> Internal

When I changed the SSL VPN Pool to 10.241.100.0/24 so that the first two octets of SSL VPN matched Internal (have an application that checks firts two octets to determine user location of on- or off-site), then I lost connectivity: no pings to internal network. I had started/stopped VPN client & remade route multiple times as well.

Not understanding why the static route is not working with the second config. 10.241.0.0/23 and 10.241.100.0/24 are definitely two separate subnets.


This thread was automatically locked due to age.
Parents
  • I'm fairly certain this hasn't changed, Bruce.  What traffic are you trying to get where?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • I'm fairly certain this hasn't changed, Bruce.  What traffic are you trying to get where?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data