Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 1 subscriber
  • Views 2904 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Computers behind OpenVPN Client cannot reach Clients behind Astaro

Nobbi
Good Afternoon guys,

since 7 days I am working on raspberrypi gateway solution in conjunction with the Astaro FW v9. The raspberryPi has the default ethernet NIC and  has been equpied with a WIFI stick. RaspberyPi shall open a OpenVPN connection over internet to Astaro. Simple client server connection. The OpenVPN linkage shall be initiated over WIFI. The computer which will be hooked up with the default ethernet NIC shall be capable to reach all networks behind Astaro over Tun0.  

Initializing OpenVPN(SSL):
RaspberryPi_Wlan0-->Internet->Astaro_includingOpenVPNServer

Stationary Usage:
Computer_Eth0-->Eth1_RaspberryPi_Tun0-->LocalNet1
                                                              -->LocalNet2
                                                              -->LocalNet3

What I did already accomplish

Computer is able to reach Eth1 by ping
Eth1 is able to reach all LocaNet's behind Tun0

What I didn't
The computer cannot reach the LocalNet's

In a different board I've been advised to adapt the SSL (OpenVPN)Server according to command-> push "redirect-gateway def1".
HOWTO

Hence, clients are supposed to be able to reach networks behind tun0 
 
Since Astaro hasn't the diversity to make real customized configs from a webinterface point of view would it be viable to adapt this SSL (OpenVPN)config manually via SSH?

I appreciate every advice

regards


This thread was automatically locked due to age.
Parents
  • 0
    After thinking about it again...I think I got it theoretically 

    I've used the remote SSL variant it should be rather a site to site connection...hmm however, I am just struggling to convert apc file to ovpn! Is there now a convinient way to convert it or it is still required to set up a virtual machine as Astaro client?
Reply
  • 0
    After thinking about it again...I think I got it theoretically 

    I've used the remote SSL variant it should be rather a site to site connection...hmm however, I am just struggling to convert apc file to ovpn! Is there now a convinient way to convert it or it is still required to set up a virtual machine as Astaro client?
Children
No Data