Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 1 subscriber
  • Views 2640 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Static RAS-Adress for VPN Users

Spoony
Hi everybody,

maybe someone can help me with this problem:

I want to have a static RAS adress per VPN-User; i have made the configuration for that adress inside the user configuration of the astaro "Static RAS Adress"

User_1 should always have 10.242.6.10

Pool-Network for VPN-Client:
10.242.6.0/24

When i go to "Cisco VPN-Client" and configure the user for VPN-Access, the following error message is shown:

German:
Es gibt keine Benutzer mit Fernzugriff über den Cisco-VPN-Client. Die statische IP '10.242.6.10' von Benutzer 'x' liegt innerhalb des IP-Pools.

English:
There are no users with remote access over Cisco-VPN-Client. The static IP 10.242.6.10 of User x is within the range of the IP-Pool 

The error message itself is seems logical to me [:)] But what can i do, if i want to use the pool AND the static IP-Adress?

Thanks in advance!

Lars


This thread was automatically locked due to age.
Parents
  • 0
    You have to choose an IP adress outside of the predefined IP pools for your static users.

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Reply
  • 0
    You have to choose an IP adress outside of the predefined IP pools for your static users.

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Children
No Data
Cookie Information Banner