This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ipsec on additional IP

Hi,

we have an ASG 8.305 with a External WAN Interface with a primary IP and three additional IPs.
We want some User to connect to one of the additional IPs with a ipsec Client software.
Our problem is that the ipsec connection only work with the primary IP of that interface.
Is there any solution to get ipsec working on an additional IP?

We have three RED devices which successfuly connect to an additional IP.
So is it possible for the Users making a ipsec connection to an additional IP?

Bjoern

This thread was automatically locked due to age.

Parents

0 BAlfson over 12 years ago

By the way, you'd still need to change the clients as per my comment in Post #3 above. The easiest would be to have the clients change the IP address they call or you could make the old IP the primary address on the interface.

In another thrread, you asked about connecting a second interface. Yes, I think you could put a switch in front of the ASG/UTM and use the IP as the primary address on a second interface with no default gateway. To avoid routing issues, make sure both interfaces are defined as /32.

Cheers - Bob
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 BAlfson over 12 years ago

By the way, you'd still need to change the clients as per my comment in Post #3 above. The easiest would be to have the clients change the IP address they call or you could make the old IP the primary address on the interface.

In another thrread, you asked about connecting a second interface. Yes, I think you could put a switch in front of the ASG/UTM and use the IP as the primary address on a second interface with no default gateway. To avoid routing issues, make sure both interfaces are defined as /32.

Cheers - Bob
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data