Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 1 subscriber
  • Views 4566 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSL VPN UTM <-> dd-wrt partially working...

RaZZe
Hey,

I have a problem.
I've Connected my home UTM with a DD-WRT owned by my brother. (SSL VPN)

I have the address range:
192.168.0.1 - 192.168.3.254
subnet 255.255.252.0

My brother has the address range
192.168.4.1 - 192.168.4.254
subnet 255.255.255.0

I followed the following instructions:
Insatiable Ramblings | Astaro Site to Site VPN with DD-WRT

This does work,  partially ... : (

My brother is coming into my network, but I can not get into his.

I'm assuming the DD-WRT has be set the routes correctly.
My UTM does not...

How do I fix this?

I thank you,
Ciao


This thread was automatically locked due to age.
Parents
  • 0
    My bad.  Had 255.255.255.252 on the brain.  Didn't read close enough.  long day.
  • 0 in reply to Scott_Klassen
    Hi,

    Config of my UTM.



    Internal Network is 192.168.0.0/22
    Site B is 192.168.4.0/24


    config(and autostart) for dd-wrt is:
    sleep 30
    echo “REF_uClaMWVnny
    REF_VMHOQOXAGW0000ref_vmhoqoxagw” > /tmp/openvpncl/user.conf
    sleep 10
    echo “client
    dev tun
    proto udp
    hand-window 30
    port 1195
    remote REMOTE SERVER
    resolv-retry infinite
    nobind
    persist-key
    persist-tun
    ca /tmp/openvpncl/ca.crt
    cert /tmp/openvpncl/client.crt
    key /tmp/openvpncl/client.key
    cipher BF-CBC
    auth SHA1
    comp-lzo
    route-delay 4
    verb 3
    reneg-sec 0
    auth-user-pass /tmp/openvpncl/user.conf” > /tmp/openvpncl/vpn.conf
    ( sleep 10 ; killall openvpn ; /usr/sbin/openvpn –config /tmp/openvpncl/vpn.conf –auth-user-pass /tmp/openvpncl/user.conf –route-up /tmp/openvpncl/route-up.sh –down /tmp/openvpncl/route-down.sh –daemon ) &



    any idea? 

    Daniel

    Edit#1:

    And here is my Tunnel status from my UTM
Reply
  • 0 in reply to Scott_Klassen
    Hi,

    Config of my UTM.



    Internal Network is 192.168.0.0/22
    Site B is 192.168.4.0/24


    config(and autostart) for dd-wrt is:
    sleep 30
    echo “REF_uClaMWVnny
    REF_VMHOQOXAGW0000ref_vmhoqoxagw” > /tmp/openvpncl/user.conf
    sleep 10
    echo “client
    dev tun
    proto udp
    hand-window 30
    port 1195
    remote REMOTE SERVER
    resolv-retry infinite
    nobind
    persist-key
    persist-tun
    ca /tmp/openvpncl/ca.crt
    cert /tmp/openvpncl/client.crt
    key /tmp/openvpncl/client.key
    cipher BF-CBC
    auth SHA1
    comp-lzo
    route-delay 4
    verb 3
    reneg-sec 0
    auth-user-pass /tmp/openvpncl/user.conf” > /tmp/openvpncl/vpn.conf
    ( sleep 10 ; killall openvpn ; /usr/sbin/openvpn –config /tmp/openvpncl/vpn.conf –auth-user-pass /tmp/openvpncl/user.conf –route-up /tmp/openvpncl/route-up.sh –down /tmp/openvpncl/route-down.sh –daemon ) &



    any idea? 

    Daniel

    Edit#1:

    And here is my Tunnel status from my UTM
Children
No Data