Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 1 subscriber
  • Views 4566 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSL VPN UTM <-> dd-wrt partially working...

RaZZe
Hey,

I have a problem.
I've Connected my home UTM with a DD-WRT owned by my brother. (SSL VPN)

I have the address range:
192.168.0.1 - 192.168.3.254
subnet 255.255.252.0

My brother has the address range
192.168.4.1 - 192.168.4.254
subnet 255.255.255.0

I followed the following instructions:
Insatiable Ramblings | Astaro Site to Site VPN with DD-WRT

This does work,  partially ... : (

My brother is coming into my network, but I can not get into his.

I'm assuming the DD-WRT has be set the routes correctly.
My UTM does not...

How do I fix this?

I thank you,
Ciao


This thread was automatically locked due to age.
Parents
  • 0
    Hi, have you defined your LAN network in the DD-WRT VPN?

    Have you defined your brother's network in the Astaro VPN?
    Did you add a packetfilter rule to allow your outbound traffic?

    Might help if you post screenshots of all the configs.

    Barry
Reply
  • 0
    Hi, have you defined your LAN network in the DD-WRT VPN?

    Have you defined your brother's network in the Astaro VPN?
    Did you add a packetfilter rule to allow your outbound traffic?

    Might help if you post screenshots of all the configs.

    Barry
Children
No Data