Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Multiple Site-to-Site-VPN

Hey everyone,

I didn't find anything regarding this in the KB, neither on the board.

I use to have a VPN connection established to my best friend's network (that is, until my old Astaro appliance chose to switched to Pikachu mode and gave me a good buzz).
Now, another friend decided to use an Astaro in her home network. 

Now the question: How to establish a multisite-VPN using only the UTM Home edition. Is it an 1:1 connection between one "core site" yor do we have to established a triangular connection?
What about routing?

Thank you in advance

Kind regards


zero


This thread was automatically locked due to age.
Parents Reply Children
  • coewar:

    Nope. The Home Edition is fully functional except for IP/client limits and some areas of customization that have been locked out.

    zero:
    Either way will work. Using one site as a central core is easier to manage and scales easier but means that core site will be a point of failure for your group of friends and traffic between all sites will be will have to share the core site's bandwidth.

    Example, if you all have a 10mbps down / 10mps up connection on all sites (A,B,C) (with B being the core site), your best case scenario for A-C (via B) is 10mbps. If the core site(B) decides to download something off the net and is eating up 5mbps, you'll only get 5mpbs across.

    The other option, a full mesh, doesn't scale as easily as the number of connections goes up drastically (4 sites = 6 links, 5 sites = 10 links, etc) but doesn't have the same bandwidth limitations. Using the example above, transfer from A-C will get 10mbps regardless of what B is doing.

    Clear as mud? [:)]