Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 36 replies
  • Subscribers 1 subscriber
  • Views 57541 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSL VPN - Not working after upgrade to UTM 9

TheExpert
Hello together,

I upgraded from ASG 8.305 to UTM 9. When wanting to connect via SSL VPN I see the following error in the Log of the SSL VPN client which is updated, too:

VERIFY X509NAME ERROR: C=de, L=***, O=*** Mössner, CN=***, emailAddress=***, must be C=de, L=***, O=*** Mössner, CN=***, emailAddress=***

You can see that there is difference for the "O" field. The certificates were imported from the ASG installation where the SSL VPN worked fine.

When looking into the certificates on the UTM 9 and on the client, the "O" field looks good, there is no problem with vowel mutation.

So my question is: Which certificate is presented with the wrong information? Is it the certifacte of the SSL VPN client or is it the CA certificate of the UTM 9 and what can I do to correct the issue without resigning the HTTPS proxy certificate and all the other certificates?

Thank you

TheExpert


This thread was automatically locked due to age.
Parents
  • 0
    HI

    I had the same problem. And I talked with the Sophos support.
    What worked for me was to delete my local user on the ASG. And then recreate it. 
    Remove the old config and cert files. And download the config again for my new user.

    Cheers
    Xcel
Reply
  • 0
    HI

    I had the same problem. And I talked with the Sophos support.
    What worked for me was to delete my local user on the ASG. And then recreate it. 
    Remove the old config and cert files. And download the config again for my new user.

    Cheers
    Xcel
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?

Unfiltered HTML