Guest User!

You are not Sophos Staff.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 38 replies
  • Answers 1 answer
  • Subscribers 5 subscribers
  • Views 106038 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Site-to-Site VPN to Windows Azure

dsidler
Hi all

Wondering if anyone successfully created a site-to-site VPN to Azure's new Virtual Network. 

Tried several options based on the Cisco and Juniper configs provided by MSFT, but to no avail. Usually stuck with a "no connection has been authorized with policy=PSK" message.

Running 8.3 on a UTM-120. 

Cheers,
Dan


This thread was automatically locked due to age.
Parents
  • 0
    I'm having the same issue. My tunnel appears to be established but no traffic is passing through. I've tried all of the combinations of settings suggested in this thread but no luck. I'm currently using the respond-only gw with: 

    IKE: Auth PSK / Enc AES_CBC_256 / Hash HMAC_SHA2_256 / Lifetime 28800s
    ESP: Enc AES_CBC_256 / Hash HMAC_SHA2_256 / Lifetime 28800s

    Any other suggestions?
Reply
  • 0
    I'm having the same issue. My tunnel appears to be established but no traffic is passing through. I've tried all of the combinations of settings suggested in this thread but no luck. I'm currently using the respond-only gw with: 

    IKE: Auth PSK / Enc AES_CBC_256 / Hash HMAC_SHA2_256 / Lifetime 28800s
    ESP: Enc AES_CBC_256 / Hash HMAC_SHA2_256 / Lifetime 28800s

    Any other suggestions?
Children
No Data
Unfiltered HTML