Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Windows 7 & Astaro SSL VPN - no routes possible because of APIPA

Hello everyone,

we are having some problems lately with the vpn client.

Sometimes the client can't add the routes because the dhcp server of the astaro is too slow when applying the ip address to the interface of the astaro client. So W7 is applying an APIPA adress (169.*).
If the client gets the wrong ip address the routes cannot be added.

When you reconnect 1 or 2 times the ip address can be applied. We already tried to set the "route delay" to 10 10 so that the client has more time to get the ip address. But that also does not work.

Anyone has similar problems and a solution ?
We have a ASG 525 and about 160 SSL clients at peak time. It happens over 3G or WLAN so it can't be the slow connection which is causing this.

Greets
Stephan


This thread was automatically locked due to age.
Parents
  • Hello,

    the Astaro VPN Client is started with administrator priviledges. This client (and also others) connect normally at the second time perfectly.

    At first it can add the routes (which isn't possible when started as user). But after you have the APIPA Adress (adapter 15 is the TAP interface) the routes get lost and therefore cannot be deleted.

    That's why there are errors at the end.

    Greets
    Stephan
Reply
  • Hello,

    the Astaro VPN Client is started with administrator priviledges. This client (and also others) connect normally at the second time perfectly.

    At first it can add the routes (which isn't possible when started as user). But after you have the APIPA Adress (adapter 15 is the TAP interface) the routes get lost and therefore cannot be deleted.

    That's why there are errors at the end.

    Greets
    Stephan
Children
No Data