This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Need help with Netgear vpn Model FVS318

trying to get a vpn from a remote office to me on astaro 8.300 using l2tp of ipsec and get error below. Also have a dumb question is that the vpn pools are different for l2tp and the ipsec, should they both be the same 10.242.3.0 vs 10.242.4.0

Notify Message Type: INVALID_COOKIE

2012:01:18-13:48:02 astaro7 pluto[20550]: packet from ipaddress:500: ignoring informational payload, type INVALID_COOKIE

This thread was automatically locked due to age.

Parents

0 BAlfson over 13 years ago

For Remote Access, the pools must be different if you will have both IPsec and L2TP over IPsec clients. In any case, I think you're in the wrong section of WebAdmin to do what you want...

There's a difference between site-to-site and Remote Access. The device you describe is capable of site-to-site IPsec connections with the Astaro.

Cheers - Bob
Cancel
Vote Up 0 Vote Down

Cancel
0 Barry_Foss over 13 years ago in reply to BAlfson

Thanks for pointing me to the correct section.

Iam getting some errors here also

cannot respond to IPsec SA request because no connection is known for 10.242.3.0/24===######## ]...#######.156[mydoamin.com]===192.168.5.0/24
2012:01:18-20:40:04 astaro7 pluto[24555]: "???? ipsec"[2] #.#.#.#

#7: sending encrypted notification INVALID_ID_INFORMATION to #.#.#.#:500
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Barry_Foss over 13 years ago in reply to BAlfson

Thanks for pointing me to the correct section.

Iam getting some errors here also

cannot respond to IPsec SA request because no connection is known for 10.242.3.0/24===######## ]...#######.156[mydoamin.com]===192.168.5.0/24
2012:01:18-20:40:04 astaro7 pluto[24555]: "???? ipsec"[2] #.#.#.#

#7: sending encrypted notification INVALID_ID_INFORMATION to #.#.#.#:500
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data