Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 1 subscriber
  • Views 456 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Need assistance with l2tp/ipsec config!!!

crowe
Hi everybody.  Right now I am trying to set up a l2tp/ipsec vpn to our internal through Astaro v8.2.  ASG is our gateway and vpn server.  The wan side feeds into our dmz with a public address and LAN on the other side (10.X.X.X).  I have the client-side configured as far as firewall rules and services that need to be started.  My biggest issue is getting the server set up.  I turned on l2tp/ipsec, set up users, and ip pool.  I need assistance with the firewall/packet filter/NAT rules.  We need to be able to vpn in from home behind a personal router.  Thank you in advance!!


This thread was automatically locked due to age.
Parents
  • 0
    Hi, crowe, and welcome to the User BB!

    Use the standard VPN Pool (L2TP), or you'll experience what appears to be routing issues.  You have to configure Firewall rules for any desired access.  Follow the L2TP guide on support.astaro.com for the client configuration.

    Cheers - Bob
Reply
  • 0
    Hi, crowe, and welcome to the User BB!

    Use the standard VPN Pool (L2TP), or you'll experience what appears to be routing issues.  You have to configure Firewall rules for any desired access.  Follow the L2TP guide on support.astaro.com for the client configuration.

    Cheers - Bob
Children
No Data