Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 1 subscriber
  • Views 2377 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Juniper <-> Astaro Site-to-Site

billic25
Hello, i need some help...


as the subject said, i have my Asatro (8.202) and a Juniper SRX100.

The Structure is simple... i want a Site-to-Site between this components.

Behind the Astaro i have 2 Networks in 2 different VLANs, my home net is 1 /24. 
My state now is : the vpn is up and running (route based vpn) BUT...

only one Networks of the 2 VLAN-net's are reachable for me @home. I tried many configurations, but now i don't know where the problem is... 

Can you please help...?


Thanks


This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to BAlfson
    Hello BoB, 

    great to "see" you again.

    So i added a link where you can see my astaro vpn configuration.



    I solved my little problem with theese settings (Local Networks -> Any) and it works, but i had this Problem many times, if i configure 2 Networks (diffenrent /24) the problem is still the same, 1 network is reacable, the other not...

    The 2 VLANs are on the Astaro Site, and my local network @ home is connected to theese 2 VLAN remote networks.

    Here is the config of the srx



    Great if you can see the problem