Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 1 subscriber
  • Views 3003 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cisco ASA 5505 to ASG

Wolfman
Hi,

I've succefully connected an ASG to a Cisco ASA (https://kb-beta.astaro.com/support/index.php/ASG_V7_to_Cisco_ASA_5505_IPSec_VPN_Example) but now I'm trying to connect an ASA to an ASG.

The ASA doesn't have a fixed IP address but the ASG does.

I tried to use the example above and changed the Gateway Type: Initiate connection to respond only... 
On the ASA site I send some packets to the ASG LAN to bring the tunnel up.
Live Log shows me that something is happening but the tunnel is still down.

Any ideas?

Thanks for your support!
Kind regards,


This thread was automatically locked due to age.
Parents
  • 0
    Please show pictures of your 'IPsec Connection' and 'Remote Gateway' defintions.

    Also, have you considered using DynDNS in the Cisco so that you can select "Initiate connection" on your side?

    Cheers - Bob
Reply
  • 0
    Please show pictures of your 'IPsec Connection' and 'Remote Gateway' defintions.

    Also, have you considered using DynDNS in the Cisco so that you can select "Initiate connection" on your side?

    Cheers - Bob
Children
  • 0 in reply to BAlfson
    Thanks for your reply,

    please find attached the screenshots.

    "Also, have you considered using DynDNS in the Cisco so that you can select "Initiate connection" on your side?"
    Nope I did not. I think there must be a solution for the "respond only" way.?

    Cheers
    Wolfgang