This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Red to main office then back out to L2TP Site to Site.

So here is the situation we just picked up an Astaro red for a remote office. We currently have one other remote location that is using site to site with L2TP. The red works great for reaching everything I need within the admin but I can not hit a few things I need at the other remote location. I am not normally the one who would deal with this in our company they are currently out and I am on a time crunch. Is what I am suggesting even possible?

This thread was automatically locked due to age.

Parents

0 Scott_Klassen over 13 years ago

Have you created applicable firewall (or packet filter depending on the version of Astaro you are using, which you didn't state) rules on the Astaro to allow traffic between the RED network and the s2s network?
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Scott_Klassen over 13 years ago

Have you created applicable firewall (or packet filter depending on the version of Astaro you are using, which you didn't state) rules on the Astaro to allow traffic between the RED network and the s2s network?
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 fcbob over 13 years ago in reply to Scott_Klassen

Scott thank you for the reply. At the main office we use asg220 which is running 8.202. At Site two we are running ASG120 also on 8.202. Site three is the red.

I have a packet/firewall rule setup on the ASG220 that is Site3 network-> Site2 network range any.
Cancel
Vote Up 0 Vote Down

Cancel