Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 15 replies
  • Subscribers 1 subscriber
  • Views 3995 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

PPTP VPN issue with v8.202

dknyinva
Hello,

I'm running v8.202 and I'm configuring three diff. remote access (PPTP, L2TP over IPSEC, and Cisco VPN Client) for iPhone.  I got both L2TP over IPSEC and Cisco VPN Client to work without issue.  PPTP doesn't seem to work and I'm getting the following error.  Please let me know if I can provide additional information.

Thanks in advance for any suggestions


This thread was automatically locked due to age.
Parents
  • 0
    One thing you might try is to connect your iPhone at home and then see if you can login with PPTP.  Unlike the IPsec access methods, PPTP answers on all interfaces.   That, at least, would eliminate the possibility that your 3G connection might not be stong enough.

    Cheers - Bob
Reply
  • 0
    One thing you might try is to connect your iPhone at home and then see if you can login with PPTP.  Unlike the IPsec access methods, PPTP answers on all interfaces.   That, at least, would eliminate the possibility that your 3G connection might not be stong enough.

    Cheers - Bob
Children
  • 0 in reply to BAlfson
    Hi Bob,

    I tried from home via WiFi and still getting the same error.  I enabled all the settings in Astaro for all three remote access (PPTP, L2TP, and Cisco VPN Client), then go to my iPhone accessing via 3G to the web portal and configured for IOS VPN.  Uisng the same password for all three VPN settings.  Only two out of three is working.[:S]

    I noticed the default drop in the FW rule.  Not sure what it means.

    Thanks again Bob