Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 1 subscriber
  • Views 756 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Site2Site: Connection established. no traffic possible

PHackert
hi there,

i've massive problems with the site to site connections.
We've multiple connections that are all up in the overview.

the main problem is that i can't ping the other sides internal IP from the remote gateway the connection is going to. (even not with the tool directly on the astaro config-page)

All "lights" are green and I can reach the external IP via ping and trace. but I can't come further. I have added exceptions for all remote private networks we want to connect to.. but that didn't help either.

does anyone have a solution?


This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to Scott_Klassen
    no side was able to reach eachother.
    we fixed some internal routing issues and figured out, that the ASG also answered on another NIC to the incoming requsts which is connected to the same switch neighbourhood. But this NIC have another IP-Range and Subnet for routing other networks. Problem is, that both NICs are answering at the same time where only the one with the correct subnet should answer. 
    The bypass was to switch off the 2nd NIC and later use a seperated switch for the other routes... 

    does anyone know, why the astaro anseres on both NICs even if they've different Subnets and Adress-ranges?

    but the general problem is fixed now. all networks (except the one behind the now switched off NIC) are able to connect to each other.

    [edit]
    and no. the VPN tunnels were created after upgraded from 8.103 to 8.201 so no misconfigured internal DB table was te reason [;)]
    [/edit]