Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 1 subscriber
  • Views 441 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Site to site going out over internet

James Shakour
I have a IPSec setup between two sites, their internal is 10.15. X.X, but their servers are 10.13.X.X if I do a tracert via 10.15 is works perfectly. 10.13 goes out over the internet and stops in the cloud and does not complete the trace. 

Any ideas?


This thread was automatically locked due to age.
Parents
  • 0
    Is this the problem?

    10.15.0.0/1610.15.0.0/16


    It's possible to use "phantom" addresses and NAT rules on the internal interfaces to connect a few devices in this situation, but the easiest long-term solution is to change one of the two subnets.

    If that's not it, then show the traceroute and a simple diagram of the situation like:

    10.13.0.0/16  internet 10.15.0.0/16



    Cheers - Bob

Reply
  • 0
    Is this the problem?

    10.15.0.0/1610.15.0.0/16


    It's possible to use "phantom" addresses and NAT rules on the internal interfaces to connect a few devices in this situation, but the easiest long-term solution is to change one of the two subnets.

    If that's not it, then show the traceroute and a simple diagram of the situation like:

    10.13.0.0/16  internet 10.15.0.0/16



    Cheers - Bob

Children
No Data