Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 1 subscriber
  • Views 1322 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

iPhone and ASG VPN - Routing internet Access

prezmc
I have the Cisco/iPhone VPN enabled, and working. I can ping internal addresses.

However, I can't find a way to force all internet traffic through the VPN tunnel.
Additionally, even though I setup my existing DNS server in the advanced settings for remote access, and allowed the VPN pools access to it, DNS still does not work.

Any help is appreciated.


Thanks


This thread was automatically locked due to age.
  • 0
    Ahhhh.  After digging more, and looking through more posts on this site.  It seems there are issues with the Cisco IPSEC, and iPhones, and getting traffic to route correctly.

    After doing many of the expected settings, I added two following networks:
    0.0.0.0/1
    128.0.0.0/1
  • 0 in reply to prezmc
    I am able to connect via Cisco, L2TPoIPSEC, PPTP using the portal config in v8.303 and get a valid address from the IP pools, but I can't get it to go through the tunnel for anything, internal or external.  I can get to google.com after establishing VPN, but if I go to IPChicken for instance, it shows my iPhone's address instead of my WAN address.  If open safari on the phone and type in the address of the ASG, it eventually comes up with a timeout error.  I've even tried connecting to the IP address it gets via the pool, and nothing.

    I'm not jailbroken, so I don't have any terminal apps or anything.  What am I missing?
  • 0
    Suprphrk, there are just too many questions in your post.  How about trying with a specific Remote Acceess method - pictures of settings, relevant lines, if any, from a logfile when connecting to IPChicken, etc.?

    Cheers - Bob