Hi
I have installed the Astaro IPsec client and it seems to be connecting to the gateway because it is being assigned an IP address. 10.x.x.x but then it gets closed because of INVALID_ID_INFORMATION
I think it might be some thing to do with local identity(IKE) in the client profile.
Any help much appreciated.
1/13/2011 12:08:10 AMSystem: Add adapter - index=207,name
1/13/2011 12:08:10 AMMONITOR: Installed - Astaro IPsec Client 1023 Build 18 (923)
1/13/2011 12:08:10 AMMONITOR: Trial version (valid for another 30 days)
1/13/2011 12:08:29 AMIPSec: Start building connection
1/13/2011 12:08:29 AMIke: Outgoing connect request MAIN mode - gateway=203.120.205.37 : Singapore Office
1/13/2011 12:08:29 AMIke: XMIT_MSG1_MAIN - Singapore Office
1/13/2011 12:08:29 AMIke: RECV_MSG2_MAIN - Singapore Office
1/13/2011 12:08:29 AMIke: IKE phase I: Setting LifeTime to 28800 seconds
1/13/2011 12:08:29 AMIke: IkeSa negotiated with the following properties -
1/13/2011 12:08:29 AM Authentication=PRE_SHARED_KEY,Encryption=AES,Hash=SHA,DHGroup=2,KeyLen=128
1/13/2011 12:08:29 AMIke: Singapore Office ->Support for NAT-T version - 9
1/13/2011 12:08:29 AMIke: XMIT_MSG3_MAIN - Singapore Office
1/13/2011 12:08:29 AMIPSec: Final Tunnel EndPoint is:203.120.205.037
1/13/2011 12:08:32 AMIke: RECV_MSG4_MAIN - Singapore Office
1/13/2011 12:08:32 AMIke: Turning on NATD mode - Singapore Office - 1
1/13/2011 12:08:32 AMIke: XMIT_MSG5_MAIN - Singapore Office
1/13/2011 12:08:32 AMIke: RECV_MSG6_MAIN - Singapore Office
1/13/2011 12:08:32 AMIke: IkeSa negotiated with the following properties -
1/13/2011 12:08:32 AM Authentication=PRE_SHARED_KEY,Encryption=AES,Hash=SHA,DHGroup=2,KeyLen=128
1/13/2011 12:08:32 AMIke: phase1:name(Singapore Office) - connected
1/13/2011 12:08:32 AMSUCCESS: IKE phase 1 ready
1/13/2011 12:08:32 AMIPSec: Phase1 is Ready - IkeIndex=19,AltRekey=1
1/13/2011 12:08:32 AMIkeCfg: XMIT_IKECFG_REQUEST - Singapore Office
1/13/2011 12:08:32 AMIkeCfg: RECV_IKECFG_REPLY - Singapore Office
1/13/2011 12:08:32 AMIkeCfg: name - enter state open
1/13/2011 12:08:32 AMSUCCESS: IkeCfg ready
1/13/2011 12:08:32 AMIPSec: Quick Mode is Ready: IkeIndex = 00000013 , VpnSrcPort = 4500
1/13/2011 12:08:32 AMIPSec: Assigned IP Address: 10.242.4.1
1/13/2011 12:08:32 AMIkeQuick: XMIT_MSG1_QUICK - Singapore Office
1/13/2011 12:08:33 AMIke: NOTIFY : Singapore Office : RECEIVED : INVALID_ID_INFORMATION : 18
1/13/2011 12:08:38 AMIke: NOTIFY : Singapore Office : RECEIVED : INVALID_MESSAGE_ID : 9
1/13/2011 12:08:44 AMIke: NOTIFY : Singapore Office : RECEIVED : INVALID_MESSAGE_ID : 9
1/13/2011 12:08:50 AMIke: NOTIFY : Singapore Office : RECEIVED : INVALID_MESSAGE_ID : 9
1/13/2011 12:08:52 AMIkeQuick: phase2:name(Singapore Office) - error - cleared by phase1
1/13/2011 12:08:52 AMERROR - 4037: IKE(phase2):Waiting for message2, cleared by phase1 - Singapore Office.
1/13/2011 12:08:52
This thread was automatically locked due to age.
