Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 1 subscriber
  • Views 441 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IPSec and QoS

ciscoman
Hi,
according to the data sheet the ASG 320 can manage up to ~ 350 MegaBit/s VPN traffic and has Gigabit interfaces.
Trying to add some QoS to the external interface, it is not possible to add more than ~ 90000 Kbps to a policy.

I expected at least to have the 350/2 Mbit  = (up/down, 175 Mbps per direction).

Do I have something overseen? 
Thanks,
Stefan


This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to BarryG
    Hi, are your interfaces connected at 1000mbps?

    What version of Astaro?

    Barry


    Yes ethtool on ASG and the switch shows connected with 1GB.

    The Version is 7.507
    HA (active/passive mode)

    Cheers

    b.t.w. just checked the same on a ASG220 (HA). There appears the same limit
Children
  • 0 in reply to ciscoman
    Hi,
    just to complete. I found the problem. It's a feature.

    Per default, the QoS interface is set to 100 Mbps. Even when the device has Gigabit Interface and are connected to Gigabit switches. If you set the QoS Interface to Gigabit, the bandwith pools settings can be adjusted to a higher limit.

    Thanks
    Cheers