This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cisco VPN to 3 Networks

Hi all,
today i activated the Cisco VPN and after i removed the domain name unter RemoteAccess -> Advanced it worked well.
But when i put more than 1 "local network" in the box on the configuraiton site i can only access the very first network.

i tested it. it always just set the route to the first network.
have a look at the screens please.

do you know how i can tell the client or the asg to set routes to all networks?
thanks!


This thread was automatically locked due to age.
Parents Reply Children
  • hi, i tried your suggestion but i am not able to add a network group to the "local networks" box on the cisco-vpn site.
  • hi, i tried your suggestion but i am not able to add a network group to the "local networks" box on the cisco-vpn site.


    Could you post the output of the command `ipsec pool --statusattr` in a root shell, please.

    Yes, here it is:

    sz1asg01:/home/login # ipsec pool --statusattr
     type  description           pool              identity        value
        3  INTERNAL_IP4_DNS                                        192.168.17.151
        3  INTERNAL_IP4_DNS      REF_zbgxvTbqmR                    192.168.17.151
    28676  UNITY_SPLIT_INCLUDE   REF_zbgxvTbqmR                    192.168.17.0/255.255.255.0,192.168.17.0/255.255.255.0
    28676  UNITY_SPLIT_INCLUDE   REF_zbgxvTbqmR                    192.168.125.0/255.255.255.0,192.168.125.0/255.255.255.0
    28676  UNITY_SPLIT_INCLUDE   REF_zbgxvTbqmR                    192.168.15.0/255.255.255.0,192.168.15.0/255.255.255.0