Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 1 subscriber
  • Views 2125 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Need Help setting up DNAT and SNAT with VPN users on different subnets

Astaro Commando
Hi all,

I'm currently using the L2TP over IPSec VPN as my primary method of dialing in. Right now, the server is just set to assign an IP on the 192.168.1.x subnet where the rest of my internal network resources are sitting. I've been trying to setup DNAT/SNAT rules to get 192.168.2.x to talk to everything on the 192.168.1.x subnet in order to avoid IP conflicts and other issues.

Can someone help me out? I would like it to be both DNAT and SNAT so that the computers on my internal network can talk to the VPN users. (For VNC purposes mainly)

Thanks for any help!


This thread was automatically locked due to age.
Parents
  • 0
    When connected via L2TP through the External interface, you have to access WebAdmin at 10.242.3.1 or 192.168.1.? (IP of Internal (Address)).  I don't know if the same is true with the other Remote Access methods.

    Cheers - Bob
Reply
  • 0
    When connected via L2TP through the External interface, you have to access WebAdmin at 10.242.3.1 or 192.168.1.? (IP of Internal (Address)).  I don't know if the same is true with the other Remote Access methods.

    Cheers - Bob
Children
No Data