Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

[SOLVED] Vista/Win7 L2TP over IPSec Connection Issues

Ok gang, I am feeling like a total noob right now. I have my Astaro up on v8.001 and things are going great for the most part. One thing I never could get going on v7 was L2TP over IPSec. So, I have decided to look at this again and my head is hurting from it hitting the wall so many times right now.

Let's start with my Astaro configuration:
l2tpconfig.JPG
As you can see, I am using my External interface with PSK and assigning address from the pool. I have pull my RAS group out and put my credentials in only.

I have set advanced RAS details used by my PPTP and SSL VPN connections as well.

Here is my Windows 7 configuration:
win7l2tp.JPG

Here is the log file I have seen when I tried to connect to my Astaro via L2TP:
2010:08:19-16:05:12 asg pluto[7825]: | 

2010:08:19-16:05:12 asg pluto[7825]: | *received 384 bytes from 96.253.145.114:879 on eth0
2010:08:19-16:05:12 asg pluto[7825]: packet from 96.0.0.114:879: received Vendor ID payload [MS NT5 ISAKMPOAKLEY 00000008]
2010:08:19-16:05:12 asg pluto[7825]: packet from 96.0.0.114:879: ignoring Vendor ID payload [RFC 3947]
2010:08:19-16:05:12 asg pluto[7825]: packet from 96.0.0.114:879: ignoring Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n]
2010:08:19-16:05:12 asg pluto[7825]: packet from 96.0.0.114:879: ignoring Vendor ID payload [FRAGMENTATION]
2010:08:19-16:05:12 asg pluto[7825]: packet from 96.0.0.114:879: ignoring Vendor ID payload [MS-Negotiation Discovery Capable]
2010:08:19-16:05:12 asg pluto[7825]: packet from 96.0.0.114:879: ignoring Vendor ID payload [Vid-Initial-Contact]
2010:08:19-16:05:12 asg pluto[7825]: packet from 96.0.0.114:879: ignoring Vendor ID payload [IKE CGA version 1]
2010:08:19-16:05:12 asg pluto[7825]: | preparse_isakmp_policy: peer requests PSK authentication
2010:08:19-16:05:12 asg pluto[7825]: packet from 96.0.0.114:879: initial Main Mode message received on 74.0.0.145:500 but no connection has been authorized with policy=PSK
2010:08:19-16:05:12 asg pluto[7825]: | next event EVENT_REINIT_SECRET in 3116 seconds


I see connection but the second to last line in the log says "initial Main Mode message received ... but no connection has been authorized with policy=PSK".

Any thoughts? I am loving the learning I am doing on the Astaro products and really do appreciate the help you all give us junior members.

*ponders if he can change his title in the Forum to "complete n00b"*

Jared


This thread was automatically locked due to age.
Parents
  • Jared, in configuring the Win7 L2TP client, did you uncheck 'Require data encryption' on the 'Security' tab?

    In the SSL VPN, when you have only "Internal (Network)" in 'Local networks', the client configuration is for a split tunnel.  If you want all traffic to go via the VPN, add "Internet" to 'Local networks'. and download the client configuration anew.

    Cheers - Bob
  • @Jared, Bob has a lot of experience setting up these things since he works with business clients. I mainly use ppptp since the client has been built in windows forever. The setup is simple and its moslty just as secure as any other vpn solution. As long as the connecting subnets don't overlap, there is hardly any configuration required to set up a tunnel.

    Good luck.
    Regards
    Bill.
Reply
  • @Jared, Bob has a lot of experience setting up these things since he works with business clients. I mainly use ppptp since the client has been built in windows forever. The setup is simple and its moslty just as secure as any other vpn solution. As long as the connecting subnets don't overlap, there is hardly any configuration required to set up a tunnel.

    Good luck.
    Regards
    Bill.
Children
No Data