Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 17 replies
  • Subscribers 1 subscriber
  • Views 6612 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

l2tp/ipsec vpn broken after ASG8 install

h3mp
just loaded ASG8 on my ASG220 and imported my v7 config...

everything works fine, apart from l2tp/ipsec clients cannot connect..

all user accounts and certs seem to be there as before..

but windows just hangs connecting (you see port opened, then connecting to... - just hangs there then times out eventually)..

anyone else suffering this? - also, where is the ipsec/l2tp log - cant see anything in the ipsec log, does this have a seperate log?

Thanks

Mark


This thread was automatically locked due to age.
Parents
  • 0
    It's difficult to see much from the PF live log.  Let's look at the same line(s) from the full packet filter log.  That there's an "uninvited" port-500 packet hitting your external interface would seem to indicate that the tunnel isn't completing, so let's look at your IPsec log (live log is the same for it), too.

    Cheers - Bob
Reply
  • 0
    It's difficult to see much from the PF live log.  Let's look at the same line(s) from the full packet filter log.  That there's an "uninvited" port-500 packet hitting your external interface would seem to indicate that the tunnel isn't completing, so let's look at your IPsec log (live log is the same for it), too.

    Cheers - Bob
Children
No Data