Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 1 subscriber
  • Views 572 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Ssl vpn

etanium
Hi,

I was able to setup SSL VPN on Astaro v7.5 but my vpn clients can not ping the Internal LAN. I have enabled all ICMP on the firewall. 

Network Details:
Internal LAN:
192.168.7.0 255.255.255.0

VPN:
192.168.8.0 255.255.255.0

Here are my questions:
1- How does Astaro know how to route from VPN network to LAN network?

2- On my packet filter log, I see a lots of following entries. But I do not have 10.240.160.233 on my LAN. Where is it coming from?

2010:02:02-21:37:24 firewall ulogd[3253]: id="2001" severity="info" sys="SecureNet" sub="packetfilter" name="Packet dropped" action="drop" fwrule="60001" seq="0" initf="eth1" outitf="unknown" dstmac="00:14:5a:22:c7:4f" srcmac="00:00:00:00:00:00" srcip="10.240.160.233" dstip="255.255.255.255" proto="17" length="328" tos="0x00" prec="0x00" ttl="255" srcport="67" dstport="68"

3- srcip="10.240.160.233" dstip="255.255.255.255" proto="17" length="328" tos="0x00" prec="0x00" ttl="255" srcport="67" dstport="68" Why is it 255.255.255.255, is it boardcast? How to let it through. I believe let it through will allow vpn to talk to lan right?

4- Why my vpn clients has no default gate? How to add one?

Thank you for your help.


This thread was automatically locked due to age.
Parents
  • 0
    What OS are the clients using?  The default gateway should have been assigned during the establishment ofthe remote connection.  This sounds like it may be the "run as administrator" issue with Vista.

    Cheers - Bob
Reply
  • 0
    What OS are the clients using?  The default gateway should have been assigned during the establishment ofthe remote connection.  This sounds like it may be the "run as administrator" issue with Vista.

    Cheers - Bob
Children
  • 0 in reply to BAlfson
    What OS are the clients using?  The default gateway should have been assigned during the establishment ofthe remote connection.  This sounds like it may be the "run as administrator" issue with Vista.

    Cheers - Bob



    I had same issue and it turned out to a "run as administrator problem." I am running windows 7 by the way. 

    Thanks,
    Gatorbyte