Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 1 subscriber
  • Views 997 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VPN RDP not working any more after upgrading to 7.502

RaimundG
Dear Forum users,

i upgraded my ASP 110 to Firmware 7.502 and since then, RDP for VPN users ist not working any more for Server 192.168.0.11.

After dial into the Astaro, a VPN user can only reach the astaro (192.168.0.1) and the DHCP server (192.168.0.10), but no other ip is reachable for the VPN users. Also, no ping for other ips is possible (printers etc)

Packet filters are set to enable ping and terminal serivces, the log says for RDPing 192.168.0.11:

Packet filter rule #3  TCP 
192.168.0.40 (VPN user):61982→192.168.0.11(RDP server): 3389 [SYN] len=52 ttl=127 tos=0x00  srcmac=--------  dstmac=---- 

Furthermore, i am able to ping the VPN Client 192.168.0.40 from 192.168.0.10, but not from .0.11. 

Does anyone have a clue about this?


This thread was automatically locked due to age.
Parents
  • 0
    Raimund, Apparently, you have only a very few users (ASG110), so you probably can get away with this workaround to the problem I tried to explain in my post above.

    In your situation, the only downside would be that all traffic through the VPN to devices in 'Internal (Network)' will appear to originate from 'Internal (Address)' instead of from the IP assigned by your DHCP.

    I wouldn't recommend this solution to anyone with a larger installation.

    Cheers - Bob
  • 0 in reply to BAlfson
    Raymund,
    When you check your Internal Network devices , is their default-gateway pointing to the ASG or to a different gateway.
    If the default-gateway is not pointing to the ASG, perhaps a solution is to make a static route for your VPN pool pointing to the LAN address of your ASG.

    regards
Reply
  • 0 in reply to BAlfson
    Raymund,
    When you check your Internal Network devices , is their default-gateway pointing to the ASG or to a different gateway.
    If the default-gateway is not pointing to the ASG, perhaps a solution is to make a static route for your VPN pool pointing to the LAN address of your ASG.

    regards
Children
No Data