This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ipsec vpn ip pool range problem

hi,

I'm trying to get remote access via IPSec  setup and working. The link is successfully establish.The issue is the ip pool that was given to the remote user which is different to the default astaro ipsec vpn ip pool.
ipsec vpn ip pool = 10.242.4.0/0
ip pool that was given = 192.168.254.0/0

Using ASC_latest.
here is the logs .

11/11/2009 1:42:34 PM  IpSrcRange=[10.136.0.212-10.136.0.212],IpDstRange=[10.136.0.0-10.136.0.255],IpProt=0,SrcPortRange=[0-65535],DstPortRange=[0-65535]
11/11/2009 1:42:34 PMIPSec: connected: LifeDuration in Seconds = 2520 and in KiloBytes = 0
11/11/2009 1:42:34 PMIPSec: Connected to REF_IaBiXNPyaj on channel 1.
11/11/2009 1:42:34 PMPPP(Ipcp): connected to REF_IaBiXNPyaj with IP Address: 192.168.254.002. : 192.168.254.003.
11/11/2009 1:42:34 PMSUCCESS: IpSec connection ready
11/11/2009 1:42:43 PMSUCCESS: Link ->  IP address assigned to IP stack - link is operational.

any suggestions ? any help is much appreciated?

thanks

This thread was automatically locked due to age.

0 BarryG over 15 years ago

Hi, which version of Astaro, and what VPN client and OS are used?

Barry
Cancel
Vote Up 0 Vote Down

Cancel
0 bhangki over 15 years ago in reply to BarryG

hi,

asg 220, firmware 7.501 using the ASC_latest and windows xp pro.

I dont have any idea where this 192.168.254.0 came from.

thanks
Cancel
Vote Up 0 Vote Down

Cancel
0 strayduck over 15 years ago in reply to bhangki

I to am experiencing this issue
Cancel
Vote Up 0 Vote Down

Cancel
0 d12fk over 15 years ago

The static RAS IP can currently only be assigned with x509 IPsec remote access connections. If PSK is used the IP the client proposes is accepted whatever it is.

This will change in the upcoming ASG V8 where we'll support IP pools as with the other remote access methods.
Cancel
Vote Up 0 Vote Down

Cancel