Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 11 replies
  • Subscribers 1 subscriber
  • Views 2309 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

iPHONE VPN from DMZ to INT Network

sfischer
Hi,

I'm using asg 7.501 and newest 3xx iPhone Firmware.
If I'm establishing from an Outside network a L2TP VPN to INT Network,
everything works. DNS resolution is ok.

If I'm connecting via WLAN, which is connected to DMZ Network, I try to open a L2TP
VPN iphone indicates, that L2TP Server is not responding.

Which NAT; PackerFilter; Masqerading should I set up?

Any ideas?

thanx
SF


This thread was automatically locked due to age.
Parents
  • 0
    Do you see any related traffic blocked in the packet filter?

    To tell you the truth, I've never tried to connect to an L2TP VPN on the External interface from a device on a DMZ interface - it's not clear to me that that's possible, but it may be.  Check if you can access the DMZ when you connect from the outside.  If so, then that would imply you would have a routing conflict if you establish a VPN from inside the DMZ.

    Cheers - Bob
Reply
  • 0
    Do you see any related traffic blocked in the packet filter?

    To tell you the truth, I've never tried to connect to an L2TP VPN on the External interface from a device on a DMZ interface - it's not clear to me that that's possible, but it may be.  Check if you can access the DMZ when you connect from the outside.  If so, then that would imply you would have a routing conflict if you establish a VPN from inside the DMZ.

    Cheers - Bob
Children
No Data