Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 11 replies
  • Subscribers 1 subscriber
  • Views 2309 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

iPHONE VPN from DMZ to INT Network

sfischer
Hi,

I'm using asg 7.501 and newest 3xx iPhone Firmware.
If I'm establishing from an Outside network a L2TP VPN to INT Network,
everything works. DNS resolution is ok.

If I'm connecting via WLAN, which is connected to DMZ Network, I try to open a L2TP
VPN iphone indicates, that L2TP Server is not responding.

Which NAT; PackerFilter; Masqerading should I set up?

Any ideas?

thanx
SF


This thread was automatically locked due to age.
Parents
  • 0
    I guess that the iPhone is set up with the FQDN of your Astaro, not its actual Public IP, and that your iPhone isn't getting DNS resolution of the FQDN to the Public IP.  Is the DMZ in 'Allowed networks' for the DNS Proxy?  Are you resolving the FQDN internally to the Internal (Address) of the Astaro?

    Cheers - Bob
  • 0 in reply to BAlfson
    Hi,

    DNS resolution in DMZ points to external IP of astaro. Same IP, if I connect from Outside.
    DMZ is in allowed networks.

    at 1 trial connection log says: IPsec SA established {ESP=>0x0034e20d 
Reply Children
No Data