Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 1 subscriber
  • Views 833 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

PPTP VPN to work

vuthappa
Hi,
 I am new to astaro internet security. Can someone please tell me how I can set up a VPN to work. Before installing astaro i used to connect via PPTP. Now it doesn't connect at all, obviously  because astaro is blocking the port. I have tried opening port 1723 and still doesn't work. Any help will be much appreciated. Thank you.


This thread was automatically locked due to age.
Parents
  • 0
    Look in the packet filter log to see what else is being blocked.
  • 0 in reply to BAlfson
    Look in the packet filter log to see what else is being blocked.


    Thanks BAlfson.
    I checked my packet filter log and saw that the traffic is still being blocked. This is my log file.
    19:06:02 Default DROP TCP 10.1.1.254: 50026→ 210.15.x.x:1723 [SYN] len=52
    19:06:05 Default DROP TCP 10.1.1.254 :50026→210.15.x.x:1723[SYNlen=52

    The settings i have done is:

    Definitions:
    Network: VPN_Client --> Host -->10.1.1.254 (PC trying to connect to work VPN).


    Network Security

    Packet Filter Source:VPN_Client
    Service: PPTP
    Destination: External (WAN) Network.


    NAT Traffic Source: Any
    Traffic Service: PPTP
    Traffic Destination: External (WAN) Network
    NAT Mode: DNAT
    Source: VPN_Client

    Can you please tell me where i am going wrong??? Thank you


    cheers
    vuthappa
Reply
  • 0 in reply to BAlfson
    Look in the packet filter log to see what else is being blocked.


    Thanks BAlfson.
    I checked my packet filter log and saw that the traffic is still being blocked. This is my log file.
    19:06:02 Default DROP TCP 10.1.1.254: 50026→ 210.15.x.x:1723 [SYN] len=52
    19:06:05 Default DROP TCP 10.1.1.254 :50026→210.15.x.x:1723[SYNlen=52

    The settings i have done is:

    Definitions:
    Network: VPN_Client --> Host -->10.1.1.254 (PC trying to connect to work VPN).


    Network Security

    Packet Filter Source:VPN_Client
    Service: PPTP
    Destination: External (WAN) Network.


    NAT Traffic Source: Any
    Traffic Service: PPTP
    Traffic Destination: External (WAN) Network
    NAT Mode: DNAT
    Source: VPN_Client

    Can you please tell me where i am going wrong??? Thank you


    cheers
    vuthappa
Children
No Data