This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSL VPN Connection Issues

I am having problems getting my SSL VPN setup correctly.

When I connect to my companies ASG through SSL VPN I have access to the internal LAN, but I don't have any connection to the machines local LAN or the internet. I believe I need to setup some sort of split tunneling to get this to work.

Anyone have any suggestions?


This thread was automatically locked due to age.
Parents
  • I don't understand what you mean by: "I don't have any connection to the machines local LAN."

    If you have "Any" in 'Remote Access >> SSL' 'Local networks', all traffic will go through your VPN tunnel as it00x32 said.  If you want to have some remote users that get a split tunnel, you will need to tell them how to change the routing in their PC.  I think you can find information on that in a KnowledgeBase article.

    Acccording to my notes, Stephan Scholz suggested:

    Yes, you can change the setting in the client. Edit the config file (\Program files\Astaro\Astaro SSL Client\config\*.ovpn) and add the following two lines:

    route-nopull
    route 192.168.1.0 255.255.255.0


    Substituting the remote network for "192.168.1.0 255.255.255.0" of course.

    Cheers - Bob
  • Ok so I did have "any" netowrk selected in my configuration. So I changed this to interal network only and still having the same results.

    Do i need to redownload the configuration files possibly to remedy the situation?
Reply
  • Ok so I did have "any" netowrk selected in my configuration. So I changed this to interal network only and still having the same results.

    Do i need to redownload the configuration files possibly to remedy the situation?
Children
No Data