Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 1 subscriber
  • Views 1231 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Routing to different internal network

FrancWest
Hi,

I've the following setup:

- Running ASL 7.403
- ASL gateway used as VPN server and internet facing firewall
- internal network 10.1.x.x, internal NIC of ASL is connected to this network
- default gateway for all clients is not the ASL box but an internal router 10.1.1.1
- we also have to internal networks, 10.3.x.x and 10.4.x.x
- SSL VPN pool is 10.242.2.0/24

Problem is that once I'm connected using OpenVPN I can access all resources in the 10.1.x.x network fine, but I cannot access 10.4.x.x and 10.3.x.x. Tracetoure stops at 10.242.2.1 (IP of ASL VPN server)

What do I need to change in order to have access to these networks? I've added these address ranges to the local networks on the global tab of the SSL VPN config page (automatic packet filter rules is enabled), but that doesn't help.

Any ideas?

Franc.


This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to BAlfson
    Hi,

    just set that route. Doesn't work. I even can't access these devices from the ASL console itself. I forgot to mention that the ASL box has 2 internal NICS. One to the DMZ and one to the internal network. Has that something to do with it?

    Franc.
Children