This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Can't ping local subnet from remote subnet

Scenario...
I have a site to site VPN between Astaro and a NetScreen. Astaro, which is local, is subnet 192.160.1.0/24 and NetScreen, which is remote is 10.8.162.0/24. I can ping remote ip addresses from the local subnet, but not the other way around. (192.168.1.0 can ping 10.8.162.0, but 10.8.162.0 can't ping 192.168.1.0 subnet.)

Here is the kicker I can't ping any of the addresses, but from the remote location I can connect to the Astaro WebAdmin over port 4444. (i.e. I can connect to 192.168.1.2:4444 from remote address of 10.8.162.250.)

Any help is much appreciated.

This thread was automatically locked due to age.

Parents

0 kwyrick over 16 years ago

Check your ICMP settings in "Network Security" > Packet Filter" > ICMP
It's the first thing I could think of.
Cancel
Vote Up 0 Vote Down

Cancel
0 dman777 over 16 years ago in reply to kwyrick

I checked this before and activating ICMP through the firewall did not make a difference. It is like my packets are getting dropped. I tried creating other packet rules to supplement the autopacket feature on my VPN tunnel but it did not help. I am stuck.
Cancel
Vote Up 0 Vote Down

Cancel
0 BAlfson over 16 years ago in reply to dman777

Well, you can check the PF log to see if anything is getting blocked.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 BAlfson over 16 years ago in reply to dman777

Well, you can check the PF log to see if anything is getting blocked.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data