Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 1 subscriber
  • Views 1148 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IPSEC Tunnel to remote site with 2 subnets

redmalte
Hello everybody,

i have a little problem with the config of an ipsec tunnel between my local astaro and a remote router.

Astaro v7.201
Remote router is a Draytek Vigor 2900V

The network map looks like the following:

192.168.2.0 (my local subnet)  192.168.13.0 (remote subnet 1)  192.168.0.0 (remote subnet 2)

Here my astaro configuration:

Remote Gateway:


Site-2-Site Overview:


The connection to the first subnet (192.168.13.0) is very fine. I can ping any device in this subnet. The problem is the second subnet, to this i get no connection.

Thanks for your help.


This thread was automatically locked due to age.
  • 0
    Hello,

    try a single vpn connection to the second non reachable subnet. Do you get a connection?
    If it works, the remote router maybe has a problem with the unique vpn identifier.

    Did you checked the IPsec log for further analysis?

    Maybe you need to enable IKE debugging while having trouble reaching the 2nd remote subnet.


    bye,

    Clemens
Cookie Information Banner