Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 1 subscriber
  • Views 227 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Routing beetween Sites

EduardoT
We have 5 IPSEC tunnels from lan to lan and we want to have IP beetween sites

Now we have IP connectivity from each site to central astaro, but we cannot ping from one remote site to another

We have all the sites NATed.


This thread was automatically locked due to age.
Parents
  • 0
    Do you have the ICMP settings enabled? Are your packetfilter rules correct?
    Are you sure the NAT is correct?

    Barry
  • 0 in reply to BarryG
    Yes, ICMP is active and NAT transversal is active also in both sides.

    I use Zywall on remote side and astaro on central side

    The settings are:

    Central IP 192.168.100.0/24
    Remote 192.168.2.0/24, 192.168.3.0/24 ....... 192.168.25.0/24
    The packet filter rules permit traffic from central to remote and viceversa
    and from remote1 to 2, 3,....24 and viceversa with no restrictions (All)
Reply
  • 0 in reply to BarryG
    Yes, ICMP is active and NAT transversal is active also in both sides.

    I use Zywall on remote side and astaro on central side

    The settings are:

    Central IP 192.168.100.0/24
    Remote 192.168.2.0/24, 192.168.3.0/24 ....... 192.168.25.0/24
    The packet filter rules permit traffic from central to remote and viceversa
    and from remote1 to 2, 3,....24 and viceversa with no restrictions (All)
Children
No Data
Cookie Information Banner