This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Vista SSL-VPN HTTP Access

I"m having problems getting HTTP access to the web once SSL-VPN is connected.
I have worked through the threads on setting up the SSL-VPN correctly on Vista, and that all works nicely now.  I have no problems access the internal network and running the internal application.
Accessing the Web whilst connected does NOT work.  I am NOT using Web Proxy.  I have Packet Filter turned on with an Any -> Any -> Any rule. I have NAT Masquerading on with two rules. First rule is Internal -> External and second rule is VPN Pool (SSL) -> External.  And I have IPS turned on.
Anyone have any suggestions??
Thanks, JulioReg

This thread was automatically locked due to age.

Parents

0 JulioReg over 17 years ago

Ok, so as soon as I posted that entry I figured out the answer...  For anyone else out there who is having the same issue, here is what I had to setup for the SSL-VPN to gain http access to the outside world once connected.
Network Security - NAT Section - Masquerading
   VPN Pool (SSL) -> External Network
Network - DNS - Global
   Add VPN Pool (SSL) to Allowed Networks
Remote Access - Advanced
   Add Astaro GW DNS entry to DNS Server #1

Hope this helps someone. Thanks.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 JulioReg over 17 years ago

Ok, so as soon as I posted that entry I figured out the answer...  For anyone else out there who is having the same issue, here is what I had to setup for the SSL-VPN to gain http access to the outside world once connected.
Network Security - NAT Section - Masquerading
   VPN Pool (SSL) -> External Network
Network - DNS - Global
   Add VPN Pool (SSL) to Allowed Networks
Remote Access - Advanced
   Add Astaro GW DNS entry to DNS Server #1

Hope this helps someone. Thanks.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data