Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 1 subscriber
  • Views 1394 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

pptp connection v/s internal lan

mulo
Hi
we are looked for a solution in many post but nothing can help us.
[8-)]
our astaro version 7.009

we have setup MS PPTP VPN no problem. Using local authentication, get correct ip
we have also setup in network security: 

  • source VPN Pool (PPTP)
  • Service: any
  • Destination Internal(network)

accordling this post https://community.sophos.com/products/unified-threat-management/astaroorg/f/58/t/52897
we have tried to add network Security/NAT from the VPN-Pool (SSL) to the internal interface (DMZ) but we can't reaches our internal lan.

wen we are connected no route from VPN Pool to internal lan are created. Infact if we type this command on the client "ROUTE ADD 192.168.1.0 MASK 255.255.255.0 10.242.1.0"
all become to work fine.

What config we are missing?
there is a way to automatically create this route from the astaro? 


than you 
Marco


This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to mulo
    ...insert the default gateway on the tab  Remote Access / Advanced
  • 0 in reply to mulo
    config looks ok if the addresses matches the reality - tried to set the "use default gateway on remote network" option??
    but:
    can u ping the lan but nothin' else? - if u try to "use" the tunnel the lan resources goin' away?
    if so, it's a KI up to 7.011 (wrong packet sequence...); up2date to 7.011 and its fine
    rgds, a.
Cookie Information Banner