This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Astaro-Netscreen VPN Connection

Hello to all!.

I have a question regarding the Astaro-Netscreen CPN Connection, I already used the Astaro Knowledgebase but it is not working.. 

The other Location used Netscreen 5 and I am using asg120, how can I connect those two? what is the best configuration? 

please help me..

thanks...

Best regards,


This thread was automatically locked due to age.
Parents
  • I would assume that Netscreen will allow for a IPSEC site to site VPN using a shared key if nothing else. Look at the IPSec site to site VPN on the Netscreen, configure a shared key, then make sure you match policies and the shared key on the Astaro side. 

    Otherwise, I know little about netscreen, but site to site VPN is typically pretty standard between firewalls.
  • Hi, i have a Site2Site VPN running between Astaro and Netscreen FVS318 using the following Policy:

    -------------------------------------------------------------------------

    It only works with PreShared Keys.

    ISAKMP (IKE) Settings 
    IKE Mode: Main Mode 
    Encryption Algorithm: AES (Rijndael) 256bit 
    Authentication Algorithm: MD5 160bit 
    IKE DH Group: DH Group 2 (MODP1024) 
    SA Lifetime (secs): 6400 
    --------------------------------------------------------------------------------
    IPSec Settings 
    IPSec Mode: Tunnel 
    IPSec Protocol: ESP 
    Encryption Algorithm: AES (Rijndael) 256bit 
    Enforce Algorithms: Off On 
    Authentication Algorithm: MD5 160bit 
    SA Lifetime (secs): 3600 
    PFS: PFS Group 2 (MODP1024) 
    Compression: Off 

    ----------------------------------------------------------------------

    Hope this hels

    Regards,

    Medic
  • "FVS318" Is this not a Netgear Firewall/Vpn Router and not Netscreen.
Reply Children
No Data