This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

No connection to PCs in VPN Network

Hi,
im running 2 Astaro Firewalls v. 7.005 in a VMWare trying to test a VPN connection.
Following configuration:

SA: 172.16.0.0/16=192.168.1.30 192.168.1.31=192.168.0.0/24

IKE: Auth PSK / Enc AES_CBC_256 / Hash MD5 / Lifetime 7800s / PFS / DPD
IPSec: Enc AES_256 / Hash HMAC_MD5 / Lifetime 3600s

packetfilter rules: any any any and icmp packets forwarding enabled

so i can ping the internal ip (192.168.0.10 and 172.16.199.1 ) from both astaros but i cant ping a laptop on 192.168.0.50 from 172.16.199.1 for example.

any advice or help would be great

mugabe

This thread was automatically locked due to age.

Parents

0 Radiohead-79 over 18 years ago

Instead of applying your own policies try setting the automatic packetfilter in the IPSec Policy. Then you do not need any rules, because they are generated automatically. If this works, you can try setting up your own policies.
Cancel
Vote Up 0 Vote Down

Cancel
0 mugabemkomo over 18 years ago in reply to Radiohead-79

auto packet filter is on, but i tried to delete all rules, still no connection
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 mugabemkomo over 18 years ago in reply to Radiohead-79

auto packet filter is on, but i tried to delete all rules, still no connection
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 medic over 18 years ago in reply to mugabemkomo

Do you only try to ping from Astaro?
Astaro itself isn't part of the VPN tunnel definition...
You have to do a NAT for the Firewalls IP.

Medic
Cancel
Vote Up 0 Vote Down

Cancel