This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Error: INVALID_ID_INFORMATION with IPSec-Client and V7.004

Hi all,

I have a 7.004 ASG with an already running Net2Net VPN Connection.
Now i Tried ti establish some Roadwarriors, as shown in the Remote-Access via IPSec-Guide from the Astaro-KB.

First I created a User locally on the Astaro (so the User should have automatically a Certificate).
Second I made a new Connection with Authentication-Type X.509, selectet the from the first step as Allowed-User.

From the Client PC I logged into the User-Portal and got Ceritificate and Client-Config-File.

The IPSec Client acepts the PIN but when trying to connect the Client's GUI says: No Connection to remote-Gateway (Yes, I can "ping" the Gateway...), the Log-Files on the Client and the ASG are showing this Error: INVALID_ID_INFORMATION

Anyone any Ideas to help me??

Thanks
Thilo

This thread was automatically locked due to age.

0 medic over 18 years ago

Please check the Virtual IP settings - possible the Config file from the Portal dosen't contain this setting.

Medic
Cancel
Vote Up 0 Vote Down

Cancel
0 mdallagi over 18 years ago in reply to medic

Hi thilo,

is your roadwarrior behind a NAT?
If so, try to specify a FQDN or an email address as ID when you are configuring the VPN...
Cancel
Vote Up 0 Vote Down

Cancel