This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

[6.301] tunnel working but bigger files do not get transmitted...

Hi,

I created a tunnel (site-to-site) with a Netgear FVL328 and an Astaro 6.301.
It's working fine almost, except of images when browsing an interface in the VPN environment...
Text gets transmitted, but the images are failing - to me it seems that everything bigger than XY kilobytes does not get transmitted...

Is that possible? What do I have to pay attention to?

Any ideas are welcome!

Michael


This thread was automatically locked due to age.
Parents
  • Check the MTU size for the VPN. Make sure both ends match, and you might want to try a lower setting (like 1200) to see if that helps.
  • Hi drees,

    what's all this about with the MTU sizes? It seems to be possible to set different MTU sizes for a LAN/ADSL connection and a VPN connection. Is that alright? So when trying some MTU with "ping -f -l MTU IP" I get a reply with 1378 bytes, but no more replies with 1380 bytes.
    Should I set the MTU for the VPN connection in Astaro now to 1378 ???

    Michael
  • Have you checked message boards about Netgear?  I had a similar problem with a Linksys VPN that was only a problem over certain ADSL lines. It appeared to be MTU related but in my case the fix was a different firmware version.

    I found that downstream was fine but upstream would choke on any file larger than 1K.
Reply
  • Have you checked message boards about Netgear?  I had a similar problem with a Linksys VPN that was only a problem over certain ADSL lines. It appeared to be MTU related but in my case the fix was a different firmware version.

    I found that downstream was fine but upstream would choke on any file larger than 1K.
Children